Furaha dusha sare ee gacanta GM150&GM200
Sharaxaada
| Sharaxaada | Unug | Tilmaamid | |
| Shayga NO. |
| 121010 | 121015 |
| Qaabka |
| GM 150 | GM 200 |
| Miiska shaqada |
| ||
| Cabbirka tabeelka (dhererka* ballac) | mm | 460*180 | 480*200 |
| Socdaalka ugu badan ee miiska (dhererka * ballac) | mm | 500*190 | 530*220 |
| T-slot ee miiska (lambarka * ballac) | mm | 1*14 | 1*14 |
| Madaxa shiidaya |
|
| |
| Fogaanta laga bilaabo xarunta spindle ilaa miiska shaqada | mm | 335 | 450 |
| Cabbirka giraangiraha shiidida(WA46*5V)(OD*Balac*ID) | mm | 200*13*31.75 | |
| Xawaaraha giraangiraha shiida 50hz | r/min | 2850 | |
| Xawaaraha giraangiraha 60hz | r/min | 3440 | |
| Toosan(kor iyo hoos) waxay quudiyaan wheel wheel |
|
| |
| halkii REV. wheel wheel | mm | 1.25 | |
| halkii DIV. wheel wheel | mm | 0.005 | |
| Ka gudub (hore iyo gadaal) waxay quudiyaan taayirrada gacanta |
|
| |
| halkii REV. wheel wheel | mm | 5 | |
| halkii DIV. wheel wheel | mm | 0.02 | |
| Awoodda matoorka |
|
| |
| Matoorka lafdhabarta | kw | 1.5 | |
| Matoor qaboojiye | w | 40 | |
| Saxnaanta shaqada |
|
| |
| Isbarbardhigga dusha mashiinada ilaa dusha salka | mm | 300: 0.004 | |
| Dusha oo qallafsan | μm | Ra0.32 | |
| Miisaanka saafiga ah/Miisaanka guud | kg | 650/750 | 750/850 |
| Cabbirka birlabeedka joogtada ah (ikhtiyaar) | mm | 400*150 | 400*200 |
| Cabirka guud (L*W*H) | mm | 1550*1150*1590 | 1680*1140*1760 |
| Cabbirka sanduuqa wax lagu xidho (L*W*H) | mm | 1000*1150*1760 | 1140*1250*1940 |
Agabka caadiga ah
| giraangiraha | 1 pc |
| Bar dheelitirka giraangiraha | 1 pc |
| Dejinta kor u qaadista | 4 pcs |
| Dabaqa daanyeer | 1 pc |
| Jeexitaanka giraangiraha | 1 pc |
| Dharka jeexjeexa | 1pc |
| Lug iyo maroojin heerka | 1 set |
| Sanduuqa qalabka iyo furaha gaarka ah | 1 set |
| Ilays iftiimaya | 1 set |
| Qalabka ikhtiyaariga ah | |
| Magnet joogto ah Chuck | 1 set |
| Boodhka ururiyaha | 1 set |
| istaagida dheelitirka wheel | 1 set |
| Qalabka qaboojinta iyo boodhka ururinta | 1 set |
